TMT Bar Rolling Mill / Cooling Bed Turnkey Solution

New Full Automatic Double Wire Rod Mill Line Start Production

New Full Automatic Double Wire Rod Mill Line Start Production

Congrats Iran 300,000 Tons Special Steel Wire Rod Mill Line Sign Agreeme...

New Full Automatic Double Wire Rod Mill Line Start Production

5 Tons EAF Tapping in KZ

Hot Strip Rolling Mill Plant Rolling Processing

The 90m High-Speed Wire Rod Rolling Line Project In Ethiopia Has Just Be...

The Laser Cladding Technology Use in Steel Rolling Mill

The laser cladding technology is a brand new surface strengthening technique that heats the powdered alloy or ceramic and the surface of the substrate to fuse them and cover the substrate with a less-dilution metallurgically bonded coating after the removal of the laser. This new type of treatment can improve the surface properties of the material like wear resistance, corrosion resistance, heat resistance and oxidation resistance, along with its electrical characteristics. The ordinary 60# steel can reach a hardness high as 2200HV after been laser clad with tungsten carbide and perform 20 times better in wear resistance. The wear resistance of the Q235 steel laser clad with CoCrSiB alloy is also better than the flame-spraying ones.

As an advanced economically beneficial technology, the laser cladding can cover the low-cost metal substrates with high-performance alloy coatings without changing its original properties and reduce the cost of rare metals. Every industrially advanced country in the world is paying great attention to related researches.  

The superiority of the laser cladding technology can be reflected in theses following aspects:

 1. High cooling velocity (106K/s).

Fine-grained microstructures and rare phases like unstable phases and amorphous phases that could not be formed under common conditions can be easily gained with this fast solidification process.

2. Low dilution rate (less than 5%). 

The metallurgical bond between the coating and the substrate, and the Interface diffusion bond can be controlled with the technical parameters of the laser to obtain an excellent low-dilution coating with adjustable compositions.

3. Less thermal input and distortions. 

The distortions can be controlled within the range of tolerance, especially when it’s been laser clad with high power density.

4. Unrestricted coating powders.

Especially when cladding the fusible metal substrates with refractory alloys.

5. Large coating ranges. 

The thickness of the coating can vary from 0.2 to 2.0mm with one single powder feed.

6. Regional cladding with superior cost efficiency.

7. Flexible beam-aiming cladding to the inaccessible areas.

8. Easily automated and totally fit for the repair of common abrasions. 

The laser cladding technology can also be used in the wear resistance and corrosion resistance fields for its large range of applicability which covers almost every aspect in the machinery manufacturing industries, such as coal, petroleum, electricity, railway, automobile, and aviation. Take the petroleum industry as an example, a large number of equipment like valves, centrifugal pumps, oil pumps, plunger pumps, screw pumps and compressors breaks down every year. These units are expensive and various in types, which makes it hard to repair. But it won’t be a problem anymore with the help of laser cladding technology.

We are China manufacturer of Steel Rolling Mill, Wire Rod Mill, TMT Rebar Mill, Electric Arc Furnace, Flying Shear, Cold Strip Rolling Mill, Continuous Casting Machine and spare part. We can supply designing, manufacturing, installation, and commission of the equipment with "turn-key" service. We can also design, manufacture and revamp other non-standard equipment according to the requirements of users.

The Laser Cladding Technology Use in Steel Rolling Mill